A few months ago I sold the veloster turbo and picked up a speed3, I've since been sitting on various parts that have been collecting dust and doing my new car absolutely no good. I'm willing to ship all parts and will include it in the cost, available I have a
Black injen short ram intake; has about 8,000 miles on it and all hardware will be included except for the "rubber" bolt that holds it up from the stock air box location, somehow this came undone at one point in driving and I never got around to replacing; I'm sure you can easily replace it with injen by contacting them or you can just get a bolt to fit there from a hardware store, I'll also include a rubber "cap" and hose clamp for the bpv intake section if you would like to hear your stock bpv or are running a aftermarket bov that doesn't recirculate. There is a little section that my hose from a catch can rubbed a little paint off, nothing more I'll post a picture.will come in original box from injen. SOLD
A set of both crank and water pump pulleys from NST blue, both have about 7,000 miles on them, the water pump pulley is a little "scratched" on the outside rim, it's not deep just the pain missing; picture example.
SOLD
A turbosocks vacuum plate with two ports, about 5,000 miles, or will probably just throw it in with a random part if no interest is shown
SOLD
I have an authentic HKS SSQV IV, in the posted picture it has the recirculating adapter and a Mazda flange, if purchased I will switch it back on to the Hyundai/Kia flange, there is two small scruffs/scratches from going back in a cleaning up the plastic with a dremel and accidentally hit it, the bov has about 12,000 miles and works and sounds beautiful; will include original box. SOLD
Every sale must have one, resonator delete, all self explanatory SOLD
I also have a red Add w1 oil catch can it is not the one with a option to VTA from the top, and both exit and inlet are 1/2" SOLD
That's all I have left, if you have any questions about the part, or would like more pictures feel free to pm me or email preferably @ juden96@gmail.com I'll check back as often as I can but generally work 16 hour days and it's hard to remember the forums sometimes so email would be best, local pick-up/meet up is always welcomed too; I live in Hemet, CA 92545 willing to make about a 30 minute drive in any direction to meetup. Thanks for looking
Sent from my iPhone using Tapatalk
Black injen short ram intake; has about 8,000 miles on it and all hardware will be included except for the "rubber" bolt that holds it up from the stock air box location, somehow this came undone at one point in driving and I never got around to replacing; I'm sure you can easily replace it with injen by contacting them or you can just get a bolt to fit there from a hardware store, I'll also include a rubber "cap" and hose clamp for the bpv intake section if you would like to hear your stock bpv or are running a aftermarket bov that doesn't recirculate. There is a little section that my hose from a catch can rubbed a little paint off, nothing more I'll post a picture.will come in original box from injen. SOLD
A set of both crank and water pump pulleys from NST blue, both have about 7,000 miles on them, the water pump pulley is a little "scratched" on the outside rim, it's not deep just the pain missing; picture example.
SOLD
A turbosocks vacuum plate with two ports, about 5,000 miles, or will probably just throw it in with a random part if no interest is shown
SOLD
I have an authentic HKS SSQV IV, in the posted picture it has the recirculating adapter and a Mazda flange, if purchased I will switch it back on to the Hyundai/Kia flange, there is two small scruffs/scratches from going back in a cleaning up the plastic with a dremel and accidentally hit it, the bov has about 12,000 miles and works and sounds beautiful; will include original box. SOLD
Every sale must have one, resonator delete, all self explanatory SOLD
I also have a red Add w1 oil catch can it is not the one with a option to VTA from the top, and both exit and inlet are 1/2" SOLD
That's all I have left, if you have any questions about the part, or would like more pictures feel free to pm me or email preferably @ juden96@gmail.com I'll check back as often as I can but generally work 16 hour days and it's hard to remember the forums sometimes so email would be best, local pick-up/meet up is always welcomed too; I live in Hemet, CA 92545 willing to make about a 30 minute drive in any direction to meetup. Thanks for looking
Sent from my iPhone using Tapatalk