Sequential Tail Lights Complete - Video!!

Veloster Turbo Forum

Sequential Tail Lights Complete - Video!!

This is a discussion on Sequential Tail Lights Complete - Video!! within the Veloster Appearance forums, part of the Veloster Turbo Garage category; Been planning this out since the end of 2015 and was finally able to knock it out. Tails have a car on/off sequence, a running ...

Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20
Like Tree12Likes

Thread: Sequential Tail Lights Complete - Video!!

  1. #1
    Senior Member
    This user has no status.
     
    dare's Avatar
    Join Date
    Sep 2013
    Member
    #4336
    Location
    Springfield, IL
    Posts
    1,558

    Sequential Tail Lights Complete - Video!!

    Been planning this out since the end of 2015 and was finally able to knock it out.

    Tails have a car on/off sequence, a running lights on/off sequence, sequential turn signal, and a looping show mode (fully customizable). Also, with sequential turn signal above, the lower spot that used to be used for the amber turn signal can now be an additional reverse light (must convert to LED). Functional!

    Enjoy-

    FRAv, orbeavhawk, NRD and 7 others like this.

  2. #2
    Senior Member
    Verbal Judo-Black Belt
     
    Dcannon203's Avatar
    Join Date
    Jul 2012
    Member
    #262
    Location
    North America
    Posts
    2,137
    love it...
    Click link below for my build thread:
    http://www.velosterturbo.org/forum/n...n203-s-vt.html

    Ironman Silver MT, w/ Blue accents. "Powered by ERGOSTEROL"

  3. #3
    Super Moderator
    Premium Member
    Cold and waiting for summer!
     
    rspec2014's Avatar
    Join Date
    Aug 2014
    Member
    #6029
    Location
    08016
    Posts
    4,625
    Wow that looks awesome
    2014 Sprint Gray RSpec M/T
    Tork Down Pipe (Ceramic Coated)
    Tork Stage 1 Dyno Tune (241/221)
    Tork SRI
    Coated ORHP
    Cold pipe with Synapse DV
    Pierce front strut bar and rear torsion bar (red of course)
    SoCal Garage Works fog light screen
    Diode Dynamics Red interior LED Lighting
    Stay Fresh Products
    König Oversteer 18x8 5x114.3 (5x4.5) +45mm Opal
    Laufenn S Fit 245/40
    MIA Panda Solenoid Mod
    Dual Saikou Catch Cans
    Greddy Exhaust
    AEM WAI

  4. Remove Advertisements
    VelosterTurbo.org
    Advertisements
     

  5. #4
    NRD
    NRD is offline
    Junior Member
    This user has no status.
     
    NRD's Avatar
    Join Date
    Jan 2017
    Member
    #10842
    Location
    Cottage country Ontario, Canada
    Posts
    25
    That's really cool, and something I've been thinking about since I got mine. Did you do this with a kit like the XKchrome? I'd love to play around with making some effects, It may not be the best of ideas for safety reasons, but has anyone ever made a sequential brake light? One that would increase it's number of lights(smaller led ones) as the brake pressure increased? I've often found it odd that you can't tell (at least from a distance) if someone is lightly pressing their brake or full on foot to the floor braking, and on the highway or at high speeds it makes a pretty significant difference to how fast they are slowing down. Would be cool if with light braking the bottom bright brake light come on, but maybe only lights a couple rows of the smaller leds above them, then as more pressure is applied to the brake more of the smaller leds could light up, or progressively increase their brightness.

  6. #5
    Senior Member
    This user has no status.
     
    dare's Avatar
    Join Date
    Sep 2013
    Member
    #4336
    Location
    Springfield, IL
    Posts
    1,558
    This is fully custom. Each individual led was rewired to 12V and then to an external sequencer. Start to finish, about 20 hours in a completed set. Cut open, ribbon pcb modified with the traces separated, wired up to run 12V, sequenced, and then plastic welded shut.
    orbeavhawk likes this.

  7. #6
    Senior Member
    Watching people do their thing
     
    TrinityVT's Avatar
    Join Date
    May 2016
    Member
    #8012
    Location
    Massachusetts
    Posts
    162
    Quote Originally Posted by dare View Post
    This is fully custom. Each individual led was rewired to 12V and then to an external sequencer. Start to finish, about 20 hours in a completed set. Cut open, ribbon pcb modified with the traces separated, wired up to run 12V, sequenced, and then plastic welded shut.
    So I am guessing this isn't cheap and or easy?
    2016 VT Rally Edition

    OEM Modified Airbox | ORCP | Clutch Switch Mod

    To Be Installed:
    PMS Torsion Bar | Rigid Collars | 3TBS | 60MM TB w/ coolant bypass | SXTH fuel line | MBRP Catback w/ 2nd cat delete

    Soon:
    ORHP | 3.5" Silicone ORIT | 3.5" XMOA | XE OCC | SXTH Cable End Bushings | SXTH custom tune

  8. #7
    Senior Member
    This user has no status.
     
    dare's Avatar
    Join Date
    Sep 2013
    Member
    #4336
    Location
    Springfield, IL
    Posts
    1,558
    Quote Originally Posted by TrinityVT View Post
    Quote Originally Posted by dare View Post
    This is fully custom. Each individual led was rewired to 12V and then to an external sequencer. Start to finish, about 20 hours in a completed set. Cut open, ribbon pcb modified with the traces separated, wired up to run 12V, sequenced, and then plastic welded shut.
    So I am guessing this isn't cheap and or easy?
    Neither nor! Will be more than most will justify spending on lighting and that's okay. I don't expect many to bite the bullet. They are pretty cool though

  9. #8
    Member
    This user has no status.
     
    Coop65sr's Avatar
    Join Date
    Nov 2016
    Member
    #10378
    Location
    Mississippi
    Posts
    30
    If it would be reasonable I'd definitely want it !! I understand cost and expense and labor though have to be accounted in pricing....
    If you need another set to practice on and want to advertise in the market down in the south, I will volunteer to send you mine then advertise for ya constantly !!! )
    2013 Ultra Black VT
    Pierce Motorsports Rear Torsion Bar
    Rigid Collars, Resonator delete
    Full CAI w/ Spectre filter
    Turbosocks Vacuum block and Glowshift Boost Gauge
    ADD W1 OCC
    Solo High Flow DP
    More to come...

  10. #9
    NRD
    NRD is offline
    Junior Member
    This user has no status.
     
    NRD's Avatar
    Join Date
    Jan 2017
    Member
    #10842
    Location
    Cottage country Ontario, Canada
    Posts
    25
    Quote Originally Posted by dare View Post
    This is fully custom. Each individual led was rewired to 12V and then to an external sequencer. Start to finish, about 20 hours in a completed set. Cut open, ribbon pcb modified with the traces separated, wired up to run 12V, sequenced, and then plastic welded shut.
    oh wow, that's incredible man. Great job!

  11. #10
    Senior Member
    @Captain_Hyundai
     
    WhiteBoy's Avatar
    Join Date
    Aug 2013
    Member
    #4179
    Posts
    2,617
    Damn.. So nice man.. I dont have the money to pay you what these are worth, but a work of art my friend
    Instagram: Captain_Hyundai

Page 1 of 2 1 2 LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

veloster sequential tail lights

Click on a term to search for related topics.
Find us on Google+