Veloster Turbo Forum banner

bov

  1. BOV Opens when under full throttle

    Veloster Turbo Problems / Help
    I have a 2015 rspec with full bolt ons and I recently added a 845 tune. I had just embarrassed a mustang gt and 2 challengers and I was going to accelerate to go get the challengers again and then the BOV opened and it went into limp mode. After I got to work I shut the car off and turned it...
  2. OEM BPV after 41k. (pictures)

    Veloster Turbo Problems / Help
    Ok, so I got a new BOV (TurboXS) today and while I have already decided to change the factory valve regardless of its condition, just look. First I didn't even notice until I pushed the rubber valve in and put a bright light on it. I'm sure this isn't how it supposed to be, right? (click on...
  3. Compressor surge after installing HKS SSQV4

    Veloster Turbo Problems / Help
    I installed the HKS BOV yesterday and everything went fine, the blow-off valve was performing like it should. I didn't place the blowoff in its factory position, I used a charge pipe to install it. However, when I gave it 100% throttle in 3rd gear, I noticed some boost leak and some delay (about...
  4. New to the Veloster Nation!

    Introductions
    hello, i'm fairly new the the Veloster family and would love some tips and advice! Please and thank you. So for starters im looking into buying a SRI and had a couple in mind. im leaning more towards a 3.5 inch beast mode intake but also looking at a K&N SRI. If i go with the beast mode could...
  5. Getting the BOV sound from BPV

    Veloster Turbo Discussions
    Hey guys, Im the greenhorn here. Nice to meet you all. I got a 13 Veloster Turbo 6 speed a little while back and I havent done much to it yet. Just about nothing in fact. I did notice however, that a lot of people were blocking off the recirculating mount and attaching a breather filter to the...
  6. TiAL Q Spring

    Veloster Turbo Problems / Help
    I recently got myself a FMIC and a TiAL Q BOV, but in the local shop that I got my TiAL Q the guy didn't even bother to help me pick out the correct spring for my setup, since I got a good deal on the BOV I just took it and started looking online as to how could I find the correct spring for me...
  7. For Sale A few VT parts I am ready to part with

    For Sale
    For Sale: -Cold pipe upgrade with turbosocks HKS BOV and block off plate: $90 OBO SOLD -5 month old Forge BOV in box with all springs and original accessories: $50 OBO SOLD -K&N SRI PIPE ONLY no filter included, also was bent with couplers but can easily be fixed, includes only the pipe! $50...
  8. BOV Not Working and Power Cut Issues

    Veloster Turbo Problems / Help
    Hi guys, I recently bought the cold pipe upgrade from Turbosocks, and the install went smoothly. It acted as expected perfectly fine for about 3 weeks and then recently all of a sudden I was driving and the BOV would not open even at high rpm. When letting off the throttle I get a really bad...
  9. BOV Recirculating vs BOV to atmosphere?

    Veloster Turbo Problems / Help
    Im a noob here and i am curious which is a better choice, to run the bov to recirculate or to atmosphere. looking for pros and cons on both. what are you guys running mostly. and what kinda benefits are you seeing to with that way.
  10. P2261 mechanical fix (Aftermarket BOV)

    Veloster Turbo DIY
    OK, so I'm not going to write up some long winded explanation as to what the p2261 CEL is, but lets just say that its caused by the failure of aftermarket BOVs not opening for the duration that our ECS want. I installed TurboSocks SSQV (style) BOV at the same time that installed my 845 FMIC...
  11. New VT owner in Miami

    Introductions
    Hello all! I'm a new proud owner of a 2013 veloster turbo with a 6 speed manual in ironman silver (kinda weird since ironman isn't silver but...). I'm in Miami, fl. I've browsed this site for an hour or so now and I love the car even more now. You guys are very helpful it seems and informative...
  12. Kinugawa BOV

    For Sale
    I have a Kinugawa BOV valve for sale.. I used it for a few months and took good care of it. Cleaned and relubed. I had bought a different valve and no longer need this one.. $70 shipped
  13. BPV Diaphragm tearing

    Veloster Turbo Discussions
    So I have been having loads of issues with my VT recently turbo wise, they dealer couldn't fix it, no codes thrown-- called corperate and they got a better dealership on the job, old one called up asking for me to rate them perfect 10 stars :disappointed: anyhow. Got a call from the new dealer...
  14. Question for anyone who has a FMIC!?!?!?

    Veloster Turbo Problems / Help
    I have a TS FMIC and I'm about to buy the hks ssqv bov and I wanna/need to know what I can do with the other line from the solenoid as in where it can go or anything since the SSQV only has one input for the hose vs the type s which you could put that hose on top of the BOV so it still had...
  15. Synapse Synchronic BOV kit in black

    Veloster Performance
    Thanks to Darden, Nick & Peter @ Synapse. They were able to develop a bolt on BOV kit for our VT's & they installed and Dyno'd yesterday. They stated they would post up the results & videos on their page shortly; so make sure to check it out for all the details! Synapse Engineering | Official...
  16. Vacuum/Boost Flange

    Veloster Performance
    Does anyone happen to know where I can purchase one? Turbosocks doesn't carry them anymore. Regardless, another alternative would be nice.
  17. GoPro Shots

    Veloster Turbo Photos/Videos
    Hey guys, just figured I'd share these with you all: New Magnaflow: Inside Engine Bay: Making sure the suction cup works: I'm going to be shooting some more, I shot these with the case on. Apparently if you're !100mph then you should not use it because it hinders sound quality. :P If...
  18. Injen CAI and Forge BOV Sounds

    Veloster Turbo Photos/Videos
    I mounted the GoPro inside the engine compartment today to try and capture the sounds from the intake and the BOV. It's kind of long, but will give you an idea as to what this setup sounds like....Just in case you where wondering. Also, at startup there is quite a bit of noise from the CAI. My...
  19. Help! Synapse Engineering, Synchronic DV / BPV / BOV, Prototyping in San Diego!

    Veloster Performance
    Hey guys, I've been talking to the staff at Synapse Engineering. They're the makers of the Synchronic Diverter Valve (DV), an alternative to the BPV or BOV designs we've all seen. Their designs are really impressive (fastest actuation in the industry @ ~25ms) and have great reviews. They have...
  20. Mopar blue plate on my VT

    Veloster Performance
    Just installed a Mopar blue plate on my VT. Works like a charm. It's an easy installation and a cheap solution. Here's some pics:
Top