Veloster Turbo Forum banner


  1. Vibrating brake pedal

    Veloster Turbo Discussions
    Everything was fine until I added my k&n typhoon intake now when I'm braking I can feel a bit of vibration in my pedal, could it be hitting something it shouldn't? Also I'm running the gfb bov if that helps any
  2. 3 Port Mishimoto Oil Catch Can

    Veloster Turbo Discussions
    Has anybody used a 3 port OCC before? If I use one of these to filter oil for the BCV and the PCV, and send it back to the PCV, would there be any pressure issues? I currently have a 2 port OCC hooked up to the PCV. I'm hoping to feed a line to the BCV and seal the valve on the air intake...
  3. CARB Certified Intakes

    Veloster Performance
    Just moved to CA, and looks like I will need to change out my 6EE Short Ram Intake (not CA smog certified), for one that is... I planned on getting a CARB certified short ram intake and just swap it in and out since i prefer the 6EE's 3.5'' diameter intake. However after searching on the market...
  4. Oil catch can setup

    Veloster Turbo Discussions
    I installed a crappy chinese oil catch can between my PCV valve and intake manifold, which worked for awhile but eventually the bottom of the OCC blew off. I'm assuming this happened because I never put a check valve between the OCC and the manifold and the constant switching from boost to...
  5. Calling all Veloster drivers in the 713 H O U S T O N

    Hey what's up everyone! I am the proud new owner of the 2016 veloster rspec. I have a few questions about it if anyone can help me out! The car is used and the previous owner has a K&N CAI installed. I looked that up on google and that is how i came across this forum. My questions are, is the...
  6. New to the Veloster Nation!

    hello, i'm fairly new the the Veloster family and would love some tips and advice! Please and thank you. So for starters im looking into buying a SRI and had a couple in mind. im leaning more towards a 3.5 inch beast mode intake but also looking at a K&N SRI. If i go with the beast mode could...
  7. Stock Intake Pressure Drop (aka restriction)

    Veloster Performance
    In case anyone is interested, I was wondering how good the stock intake is, to know whether it is worth messing with much. I came up with a way to test it. I have a portable pressure meter for work (used for measuring air velocity with a pitot tube but it also measures absolute pressure). I did...
  8. "Big Gulp" SRI Intake

    For Sale
    Selling my SRI with filter for Veloster turbo. This one is set up to recirculate but it can be plugged if venting is what is desired. Used for less than a year Small scratches but no structural damage also selling an exhaust-see other ads Price and shipping negotiable EDIT: andrewkthompson...
  9. Getting the BOV sound from BPV

    Veloster Turbo Discussions
    Hey guys, Im the greenhorn here. Nice to meet you all. I got a 13 Veloster Turbo 6 speed a little while back and I havent done much to it yet. Just about nothing in fact. I did notice however, that a lot of people were blocking off the recirculating mount and attaching a breather filter to the...
  10. intake/downpipe/exhaust diameter, high RPM gains vs low RPM loss?

    Veloster Performance
    Hello all, i am looking into improving my air flow for added performance. How important is it to match the diameter of intake/downpipe/exhaust. Maybe the downpipe doesn't belong with the others but i am looking at one with a Highflow Catalytic Converter, hoping to pass inspection. If that will...
  11. Beast Mode 3.5" SRI vs CAI

    Turbosocks Performance
    So just a little info for everyone running the 3.5" Beast Mode CAI version.... I got tuned at the Tork Atlanta event this past Saturday and I was running the CAI version of the intake. On the first couple of runs, my car produced lower numbers than the guys at Tork the point they...
  12. Karbon Koncepts - Annual Injen Intake Group Buy

    Karbon Koncepts
    Is proud to announce our 3rd Annual Injen Intake Group Buy Injen Intake Systems Group Buy | KARBON KONCEPTS _________________________________________________________ All Injen Intake Systems are at the lowest prices that we can offer through March 10th!! Shipping is included in your...
  13. New VT owner in Miami

    Hello all! I'm a new proud owner of a 2013 veloster turbo with a 6 speed manual in ironman silver (kinda weird since ironman isn't silver but...). I'm in Miami, fl. I've browsed this site for an hour or so now and I love the car even more now. You guys are very helpful it seems and informative...
  14. Performance Air Intakes

    Veloster Performance
    Hey guys, I was pretty excited to get my first upgrade for my VT A/t with ultimate package. Got this sweet intake put in the other day. My friend designed and made it himself. His business is called Advanced Race Technology in Sarasota, Florida. It looks sweet, and it sounds freaking awesome...
  15. For Sale Injen IS1341BLK SRI intake (Black), for VT

    For Sale
    This is LNIB, I literally installed it today and removed it in a matter of hours. All parts and original box intact. The sound is just not my cup of tea. $200 Shipped in Canada, if shipped to USA I will cover half (can be negoiated) Payal or EMT
  16. 7500 miles in and noticed some nice changes, time for mods?

    Veloster Turbo Discussions
    I currently have around 8700 miles on my car. The only mods I have done is the clutch switch and to remove the magnet from the air box. Around the 7500 mark I thought the exhaust sounded a little louder and continued to get louder until about 8k or so. A friend even asked if I had done...
  17. AEM CAI: DIY Installation and Post-Install Opinions

    Veloster Turbo Discussions
    Hi all, I just got the AEM 21-724C cold air intake system for my 2013 VT. This thread is directly "ported" from for my fine friends with VTs. First, a couple of things about my car: I have about 7500 miles on it, have already had my first oil change, and have an A/T. I have long...
  18. Injen CAI and Forge BOV Sounds

    Veloster Turbo Photos/Videos
    I mounted the GoPro inside the engine compartment today to try and capture the sounds from the intake and the BOV. It's kind of long, but will give you an idea as to what this setup sounds like....Just in case you where wondering. Also, at startup there is quite a bit of noise from the CAI. My...