Just bought a OCC and was wondering which is more beneficial, a connection to the PCV or to the CCV. I might be getting another OCC to run to both depending on its importance contrasted to the other. Thanks!
Our vehicles have direct injection turbo charged engines which means the fuel/air mixture doesn't enter the engine's cylinders through the intake valves, our injectors spray fuel directly into the combustion chamber. Meaning cleaning agents within the fuel don't have the opportunity to clean the...
I’m trying to only run 2 catch cans one oil cap vent then small filter, and a 3 way can, pcv valve and valve cover either vented to a filter again or back into the pcv return, does this configuration hurt anything by combining the crank case and pcv into one can and which would be better between...
Hi-
So, my very first mod (well second if you count putting the air filter back in with the little flap propped open) will be to install this catch can being delivered this afternoon.
Evil Energy catch can on Amazon
It's not fancy or expensive, but it's got good reviews and I think it'll do...
Has anybody used a 3 port OCC before? If I use one of these to filter oil for the BCV and the PCV, and send it back to the PCV, would there be any pressure issues? I currently have a 2 port OCC hooked up to the PCV. I'm hoping to feed a line to the BCV and seal the valve on the air intake...
I installed a crappy chinese oil catch can between my PCV valve and intake manifold, which worked for awhile but eventually the bottom of the OCC blew off. I'm assuming this happened because I never put a check valve between the OCC and the manifold and the constant switching from boost to...
PROSPORT Catch Can / AEM CAI
Hello Everybody,
CATCH CAN IS SOLD.
First, I have one PROSPORT Catch Can for sale. I'm only asking $20 + shipping. It is pretty much brand new. I bought it less than a month ago, but I have already changed my mind about the set-up I want on my car. As you can see...
Hey guys, I know I made a previous OCC post, but this is for a different reason. My OCC has been leaking and even after putting silicon and tightening lose bolts, it still leaks...
So for the guys who have had successful OCCs, which ones did you buy? Could you give me a direct link or at least...
So I'm finally getting around to installing the OCC. I'm looking at putting it here:
And I'm going to use those two mounting bolts for a solid install. I don't want it bouncing or floating around.
I wanted to know what is the bolt towards the bottom called? Engine Mount ________, something?
I...
There is about a 10 page long sticky on Oil Catch can, but i couldnt find a step by step DIY anywhere, I finally got my universal can in the mail and i would iike to know how to install it.. can anyne help?