Veloster Turbo Forum banner

Do I have all the parts I need for turbo replacement?

578 Views 3 Replies 2 Participants Last post by  412_vt
These are all the parts I have ordered. Re-using the oil drain line and coolant lines. I already have the new turbo but I want to make sure I have everything I need before I tear it apart. Any insight would be great.

Coupling gasket
Manifold gasket
Oil feed tube eye bolt
Oil feet tube washer
Oil feed tube
Oil feet tube gasket (upper and lower)
Oil return tube gaskets
Valve cover gasket
Oil pan
Extra manifold studs in case a few break
Coil packs (4)
Oil pan
Water hose assembly washer
Water hose assembly bolt
HPFP o-ring
1 - 2 of 4 Posts
Doing the core is as simple as removing the intake and inlet pipe. Remove the drain and feed lines, remove the coolant lines . Undo the v-band and gently pry it apart.
I ended up already replacing it. Had everything except the turbo inlet gasket even tho I went through all the part numbers with Hyundai parts and they said I had everything smh. Replaced the entire turbo assembly.
1 - 2 of 4 Posts