Veloster Turbo Forum banner

Jacked my new speakers :(

1438 Views 6 Replies 5 Participants Last post by  VeloT
So I decided to go back and check on my front speaker install and I found that the bottom edge of the speaker surround was being compressed by the door grill. Now they are dimpled on the bottom edge.
I took off the speaker and noticed there was about 1/8" speaker frame on the spacer left over from the factory speaker. I removed it and I also shaved down some of the honeycomb reinforcements on the bottom edge of the grill. Now the surround just barely touches under flex. Is that too close still to the surround? Are the dimples going to ruin my 2 day old speakers?
Audio equipment Auto part Metal
See less See more
1 - 1 of 7 Posts
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.