Veloster Turbo Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
44 Posts
I came across this motor oil today. First time I have heard of it and was wondering if anyone has any experience or thoughts about it.
It's MAG 1 Full Synthetic with the following properties.

TYPICAL PROPERTIES
Boron, wt. % ASTM D5185 0.023
Calcium, wt. % ASTM D5185 0.135
Cold Cranking Simulator at (°C), cP ASTM D5293 4400 (-30)
Color ASTM D1500 3
Flash Point, °C ASTM D92 227
Flash Point, °F ASTM D92 441
Foam Seq. III (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. II (Tendency/Stability), mL ASTM D892 (Opt. A) 10/0
Foam Seq. I (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Gravity, °API ASTM D287 34.93
High Temperature Foaming, static foam ASTM D6082 (Opt A) 15/0
High Temperature / High Shear Vis at 100°C, cP ASTM D6616 6.9
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.2
Magnesium, wt.% ASTM D5185 0.059
Molybdenum, wt. % ASTM D5185 0.0079
Nitrogen, wt. % ASTM D4629 0.104
Noack Volatility, % loss ASTM D6375 12
Phosphorus, wt. % ASTM D5185 0.076
Pour Point °C (°F) ASTM D5950 -45°C (-49°F)
Pumping Viscosity at (°C), cP ASTM D4684 15,000 (-35)
Shear Stability, Final Viscosity in cSt ASTM D6278 9.4
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8502
Sulfated Ash, wt. % ASTM D874 0.9
Sulfur, wt. % ASTM D4951 0.3
TBN, mgKOH/g ASTM D2896 7.9
Viscosity @ 100°C cSt ASTM D445 10.91
Viscosity @ 40°C cSt ASTM D445 62.09
Viscosity Index ASTM D2270 169
Zinc, wt. % ASTM D5185 0.085

Not being a petroleum engineer, I don't even play one on TV, I am asking the seasoned pros here.
 

· Registered
Joined
·
44 Posts
Thanks for checking it out. I had never heard of this brand until this morning. Wasn't sure if it was the next great thing out there or not.

I will be steering clear of it then. Keeping PUP as my go to and T6 as back up.
 
1 - 3 of 3 Posts
Top