[|]are |]evil]

I like these. Will these fit? I will lower with H&R springs, no slamming. CO's later, springs for now.
F1 Silver 18x8 5x114 3 Nissan Lexus Dodge Infinity Honda Mitsubishi Wheels Rims | eBay

hack job

 

[Keith_Stone]

Not sure because I don't know wheels, but I will say those look sick

 

[btjetman]

Yes they will fit with no problems.

 

[GT800]

Yes they will fit with no problems.

Yup definitely

 

[MyDianaZ06]

Couldn't find what size the center bore is, but As long as the center bore is the same size or bigger then like everyone else said it will work. Like Keith Stone said those rims are hot.

 

[|]are |]evil]

So if I know the specs, 18x8 + 40, does this tell me how much the wheel will stick out/in fender? Will I need spacers to fit flush?

Thanks for all the feedback everyone!

 

[MyDianaZ06]

So if I know the specs, 18x8 + 40, does this tell me how much the wheel will stick out/in fender? Will I need spacers to fit flush?

Thanks for all the feedback everyone!

18X8 +40 probably will not poke out the fenders. But I am not 100% sure. If you plan to drop it and have the tires tuck in the fenders like this

Then you might not be able to because this wheel is 18x8.5 +50. But it'll be VERY intesting if it does tuck like that because even though your saving half an inch on your rim with you are adding .39 inches going from +50 to +40.

You will not want to use spacers unless you want a poke. It will probably look flush but you plan to slam it you might rub a little.

Also, make sure your center bore is 67.1 or bigger though. Other than that your straight.

 

[|]are |]evil]

No tucking for me, I am not a fan of that look.

This is as low as I will go

 

[MyDianaZ06]

Then you should be fine. As long as the center bore is 67.1 or bigger than go for it. You can run that all day long with no trouble other than people looking a little longer at your car because it is sick

 

[|]are |]evil]

now my only concern is the ebay seller only has 1 feedback.

 

[MyDianaZ06]

It says if you have any questions PLEASE CALL OR TEXT AT ANY TIME (301) 256 8773.

Does seem weird but if it doesn't work out Ebay will take care of you. These days ebay has a weird policy protecting the buyer better than the seller. You can literally sell something on ebay, and if the buyer doesn't like it the buyer can send it back with full refund. And if the buyer sends a empty box back to the seller, then the seller can get his money back too form ebay. It is weird. I wouldn't worry about it. I'd just call him tomorrow morning and ask him a few questions to make sure it is legit.

 

[RichieP]

No tucking for me, I am not a fan of that look.

This is as low as I will go
View attachment 5660

Thats my car. I have Eibachs with Axis XMX 18x8 45mm offset with 12mm spacers in front and 15mm spacers in rear.

 

[Turbosocks]

those wheels will work.. The seller and their pics that don't even match some of their wheels would make me a little iffy.. Also, showing a BBS centercap on a fake BBS rim... ehhhh..

If the center bore is too small, throw on a set of 8mm spacers and good to go. Center bore wont matter at that point.

I would probably look for a different wheel though.. 204$ is a somewhat pricey no name rim. I got my wheels for ~145$ a piece. Hell, you can get a forged TSW Nurburgring for around 204$ a piece!!!!