Has anyone installed these yet? I had the nameless performance 80A mounts on my NA and It vibrated way too much. Torque solutions offer 75A polyurethane (instead of the urethane 80A) mounts. Will these be any better? I just want less vibration (especially when the AC is on).
Torque solutions lower engine mounts?
1 - 20 of 106 Posts
Joined
·
2,187 Posts
i get vibration even when the heat and fans are on ... its weird.
Joined
·
7,106 Posts
are you talking about these motor mounts?
http://shop.namelessperformance.com/2012-hyundai-veloster-motor-mounts/
http://shop.namelessperformance.com/2012-hyundai-veloster-motor-mounts/
Joined
·
1,818 Posts
I have the Nameless ones. It vibrates every now and then, but not consistently all the time. They were a real pain in the ass to install too. Ended up having to put a longer bolt in.
Joined
·
7,106 Posts
did you have to put longer bolts like HellHunter did with his nameless mounts?
Joined
·
193 Posts
I have the nameless bushing and didnt have to use other than stock bolts, it took like 5-10min to do...you just need to tell them thats its for a VT manual when you order them, they need to modify them to make them fit but they to this at no extra charge and they were perfect fit. And I got some vibrations too...but nothing to worry about.
Joined
·
448 Posts
No, everything fit back in as it came out. As serioussam points out, HellHunter may not have received the correct bushings.
Joined
·
3,080 Posts
What's the benefit of a softer compound mount?
Joined
·
7,106 Posts
I think what they are getting at is both mounts are going to be stiffer than stock mounts. very weak stock mounts is what we are assuming the root of that sound you here after installing that brace. having stiffer mounts are huge benefits but being that they are stiff you might have the motor vibrate on certain rare conditions. still a better trade of when your factor in what you say the sound of your car falling apart for a something you won't notice all the time.
the thread is trying to determine which stiff mount is better. torque solution or nameless.
the thread is trying to determine which stiff mount is better. torque solution or nameless.
Joined
·
7,106 Posts
great thread non the less. I had no clue you had to call and let them know you have a manuel tranny so they send you the mount to use stock bolts. great info.
Joined
·
7,106 Posts
I didn't get into great detail. but found a seller on ebay that has two versions. a "performance" for stock and slightly modified (green 65a)
http://pages.ebay.com/motors/link/?nav=item.view&id=111036339993
Made of high grade polyurethane right here in the USA.
65A durometer is less dense than our race mount to help eliminate added vibration and is optimal for stock and lightly modified cars.
Oversized to provide optimal contact and limit engine movement.
and they have a "race" for modified cars that are driven hard (red 75a)
http://pages.ebay.com/motors/link/?nav=item.view&id=111014553169
Made of high grade polyurethane right here in the USA.
75A durometer is extremely dense and optimal for hard driven cars.
Oversized to provide optimal contact and limit engine movement.
BOTH $30 shipped.
VERY interesting find. I'd do it just cause its only 30 bucks. I'd get the green ones btw
http://pages.ebay.com/motors/link/?nav=item.view&id=111036339993
Made of high grade polyurethane right here in the USA.
65A durometer is less dense than our race mount to help eliminate added vibration and is optimal for stock and lightly modified cars.
Oversized to provide optimal contact and limit engine movement.
and they have a "race" for modified cars that are driven hard (red 75a)
http://pages.ebay.com/motors/link/?nav=item.view&id=111014553169
Made of high grade polyurethane right here in the USA.
75A durometer is extremely dense and optimal for hard driven cars.
Oversized to provide optimal contact and limit engine movement.
BOTH $30 shipped.
VERY interesting find. I'd do it just cause its only 30 bucks. I'd get the green ones btw
Joined
·
7,106 Posts
look at the green inserts I'd just posted. it's just $30 shipped and it's 65a should be a lot better than what you got.
Joined
·
3,080 Posts
Thanks for the post. Just ordered myself a set of the red ones and made sure to message the seller letting him know its the VT w MT. Not sure if he offers any kind of modified mount that fits better. I'll find out I guess.
Joined
·
1,257 Posts
Bah, they don't ship outside USA and Canada!
Joined
·
682 Posts
I woul dget both and switch around for DD and track days 
Joined
·
963 Posts
I'm thinking of getting the 75a version. Let me know how those performace one fit the VT.
1 - 20 of 106 Posts
