Veloster Turbo Forum banner
1 - 4 of 4 Posts

Registered
2015 RB Accent-not so stock 馃か
Joined
763 Posts
Discussion Starter · #1 ·
Anybody have the specs on the torque for the clamp holding the turbo to the manifold?
I just put mine back together after getting the manifold back from jethot but there's no info I could find in the service manual or here on the forums.

It's the V-clamp holding the turbo to the exhaust manifold.
 

Attachments

Super Moderator
2014 Veloster Turbo Manual
Joined
4,221 Posts
Looks pimp!

just gudntite that bitch ;)
 

Administrator
2015 auto VT, 2013 manual VT 脳 2
Joined
6,487 Posts
Should be same or similar tq spec as any other bolt with 10 mm head on the car since that V-band nut is 10 mm.
 

Registered
2015 RB Accent-not so stock 馃か
Joined
763 Posts
Discussion Starter · #4 ·
Should be same or similar tq spec as any other bolt with 10 mm head on the car since that V-band nut is 10 mm.
I'll keep that in mind.
I didn't pay attention to how tight this nut was when I removed it. My bad. 馃う
Thanks all. 馃檹馃憤
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top